| 1. | 1800 package - 6 pages normal design
包年网页储存 |
| 2. | 5 pages normal design
五页专业设计 |
| 3. | Based on the the analysis of structure and design process of turbine blade , the normal design rules of turbine blade are presented in this paper which are realized by the way of the design wizard in the modeling system
本文详细分析了涡轮叶片的结构和设计方法，在此基础上总结了涡轮叶片的设计规范，并把此规范以设计向导的方式应用于系统中。 |
| 4. | The most important experience is that the planting of groundcover in the woods cannot only rely on the blueprint , and the secondary design or on - site design should be integrated into the original program as a normal design process
从中得到的体会是：林下地被的种植很难依赖图纸来完成， “二次设计”或“现场设计”应作为一个正常的设计程序，融入最初项目计划或预期筹划之中。 |
| 5. | A method of reconstruction of the air - flue model through the combination of reverse engineering and traditional normal design is brought forth here . in the end , combining the reverse engineering and rapid prototyping , a satisfied product is made out
本文对发动机气道模型的逆向工程做了一些探求，并提出了在逆向工程中结合正向设计重构气道模型的一种方法，并通过气道模型的逆向工程与快速成型相结合，最终获得较满意产品。 |
| 6. | Based on the analysis and comparison on the normal design methods of distributing system , we propose a wholely distributed implementation method of ospf based on warr ( with - area - routing - region ) , lay an emphasis on the parallel routing table computation and the design of the link state database , and describe the ospf protocol processing in detail . in the chapter four we give a software implementation of our design . the test of implementation proves that our design is feasible and correct
在对现有分布式系统一般设计方法分析比较的基础上，提出了基于warr ( witharearoutingregion )技术的全分布ospf协议实现方案，重点对并行路由表计算及链路状态数据库发计进行了详细研究，并详细分析了osfp协议的各个处理过程，从软件设计角度实现了该设计方案，实际测试环境测试的结果验证了该方案的可行性及正确性，同时系统性能分析的结果表明，该设计方案能满足tbit路由器设计需求。 |
| 7. | The guyed mast structure is a high - rise system made up of soft cable and slim mast . the interaction between the inclined guys and the mast makes its nonlinear dynamics very complex . the damage probability of guyed mast is especially high under normal designing and constructing in civil engineering fields
桅杆结构是由柔索和细长的杆身组成的高耸结构，斜拉的纤绳和杆身使其非线性振动十分复杂，在正常设计、建造及材料情况下，桅杆结构破坏发生的比例之高在土木工程界是少见的。 |
| 8. | The key point of this usage is developing related testing criterion and regulations of fwd through research testing in large scale and in many areas in our country , meanwhile the backcalculating method also need improved further . in addition , the back - calculated moduli should be corrected to the normal design condition , then it can be used in the final overlay design . 3
指出应用此设备的关键是需要开展大范围的测试试验研究为依据，并建立有关fwd的测试标准与规程，提高弯沉量测值的标准和精度，以及从反演方法上改进反演理论模型，提高模量反演结果的精确性和稳定性，最终对反演模量还要加以修正，才能应用于罩面厚度设计。 |
| 9. | The so - called " transparency " means whether the hardware protection locks will cause any irregular interferences or changes to the data that is exported from a computer s printer port ; the normal design of protection locks will not have any impact on data from it and the transparency can also relate to the " compatibility " with other products
所谓透通性，即是指硬件保护锁是否会对由计算机的打印机端口输出的数据造成不正常的干扰或改变正常保护锁的设计，是不应该对打印机端口输出的数据造成任何影响的另外，透通性也关系到与其它产品的兼容性问题。 |
| 10. | Due to the influence of the corrosive agents in the outer environment , the resistance and dynamic reliability of the chemical structures declined with time very fast . and it is difficult for the chemical structures that with the normal design reliability level to fulfil their structural functions . on the condition that the design service life is confirmed , the design reliability level of the chemical structures should include the corrosive environment and its effect on the structures . based on agents ' corrosiveness fuzzy classification , this paper suggests a practical method on design reliability level decision - making of the industrial structures , which is very useful for the anti - corrosion design of the industrial structures
化工结构由于受到外部腐蚀性介质环境的影响，其承载能力及动态可靠度水平随使用时间衰减过快，按照普通结构设计可靠度水平设计的工业建筑常难以顺利完成设计使用功能.因此，在设计基准期预先确定条件下，化工结构的设计可靠度水平应综合考虑腐蚀性环境及其对建筑结构的影响特点来决策.根据介质腐蚀性模糊分级，提出了工业建筑设计可靠度水平的一种实用决策方法 |
